BIOS

BIOS Update Diskette v3.18 05/08/95
This upgrade is only for models 3W1 and 741. Disk image utility for .dsk files

4693-3w1 BootP Reference v3.20 12/18/95
Installation/Diagnostics for 4693-3w1 BootP only.  Disk image utility for .dsk files

Video

DOS and VESA Utilities
Diskette 1/2 and  Diskette 2/2    v3.20

OS/2 Linear Drivers for Warp 3
SBCS Models 741/3W1 using C&T 65535/40, 02/01/96
SBCS Models 741 using C&T 65545, v4.2.0
DBCS Models with 1M VRAM v1.0

OS/2 Non-Linear Drivers for Warp 4 v1.0.0 03/10/98
SBCS Model 741 using C&T 65540/45; 640x480x256 colors only

Windows 95 Linear Drivers v2.0.3
Model 741 with 1M VRAM using C&T 65540/45; 640x480x256 colors only.

Windows NT Linear Drivers
Model 741 using C&T 65540/45 with NT 3.51 05/06/96 or NT 4.0  10/04/96

Windows 3.1 Linear Drivers
SBCS Model 741 using C&T 65540/45 chips v3.2.3
DBCS Model 741 using C&T 65540/45 chips v3.2.0

Network

Supplemental Drivers v3.5.9 04/20/99
Includes DOS and Windows 95 Networking support, RPL instructions and utility  programs for the 4614, 4693, 4694 and 4695.

Service

Terminal Reference & Diagnostic Disk v3.50 04/15/02
Combined reference/diagnostic for 4693-321, 421, 541-medialess, 741-medialess and 741-w/media. It does not support the 541 with media.

Model 541 Terminal Reference Disk v3.50 04/15/02
Reference for 4693-541 with media.

Model 541 Terminal Diagnostic Disk v3.50 04/15/02
Diagnostic for 4693-541 with media.

Note

To rebuild diskettes from image files, download the EXE file, insert a diskette in drive A: and run the EXE file. If you are rebuilding the image under Windows NT®   you must go to a command prompt and enter "FORCEDOS filename.exe to rebuild the diskette